* ✅ DEEP POUR EPOXY RESIN UP TO 4’’ – Excellent for any Deep Pour, River Table, Casting & more. You can expect your project to cure with zero bubbles! This product cures slowly in about 48-72 hours, allowing plenty of time for the bubbles to release in the deeper pours. It leaves you plenty of working time as well, ~1 to 3 hours until it starts to gel.
* ✅ SAFE – Enjoy this safe odor-free and low voc epoxy resin for any kind of job. Approved by the Canadian Food Inspection Agency.
* ✅ EASY TO USE – Magic CAST epoxy resin is a 100% solids, two components, clear polymer. Low viscosity. Mix flawlessly with mica powder and other coloring materials! Mixing ratio 2:1. Slow cure time.
* ✅ HIGHLY RESISTANT – This epoxy resin product is scratch resistant, water resistant and will not exhibit blushing or sweat out
under high humidity conditions.
318AB-9T Clear Casting Epoxy Resin come in two parts: Eppxy Resin and Hardener. The two parts must be mixed in the precise ratio A:B=2:1 by weight. Imprecise measuring and mixing prevents the epoxy resin from solidifying or curing.
|
Item (318AB-7T)
|
Epoxy Resin(A )
|
Hardener(B)
|
|
Color
|
Transparent Liquid
|
Transparent Liquid
|
|
Viscosity@25℃(mpa.s)
|
380-450
|
30-40
|
|
Mix Ratio(by weight)
|
2
|
1
|
|
Hardness(Shored)
|
75-80
|
|
|
Operation time(100g mixed glue ,25℃)
|
50-60minutes
|
|
|
Curing Time(25℃)
|
24-26hrs
|
|
|
Curing Time(35℃)
|
8hrs
|
|
|
Shelf Life
|
12months
|
|
1. Warm the Formula: To ensure the best results, sit both the resin and hardener in hot (not boiling) water for 10 minutes to warm the formula. This will make it easier to mix and ensure a smoother application.
2. Allow the Formula to Cool: Once warmed, leave the formula to rest until it reaches room temperature. This step is important to ensure that the resin cures properly and achieves its desired properties.
3. Mix the Formula Thoroughly: Once the formula has cooled to room temperature, it’s time to mix the resin and hardener. Stir the two formulas for 6-8 minutes, being careful to mix well and avoid bubbles. Stir slowly, at a rate of one circle per second, and be sure to measure 2:1 by volume.
Pro Tip: To remove any bubbles that may have formed during mixing, use a heat gun while the mixture is curing. Be sure to keep the environment at around 25 degrees Celsius with low humidity while your project cures. If the room temperature is too low, the mixture may take longer to cure.
